What should we be aware of during the installation of Solenoid Valve?

What should we be aware of during the installation of Solenoid Valve?

1. Firstly: Before the solenoid valve is installed, we may be involved in a lot of related parameter issues, so we should first consult the operating instructions of the solenoid valve to determine whether the solenoid valve purchased is consistent with the requirements of the operating environment. The pipeline of the solenoid valve will contain impurities when it is stored, so flush it before installation and use. A filter should be installed on the pipeline with unclean media to prevent impurities from hindering the normal operation of the solenoid valve. This is also an important work for the daily maintenance of the solenoid valve, and the technology cleans up the internal impurities.

2. Secondly: Since the solenoid valve works in one direction, it is necessary to check the positive and negative directions when installing, and not reverse installation. It must be ensured that the indicating arrow on the solenoid valve is consistent with the direction of movement of the pipeline medium. There are also considerations in the installation direction. The solenoid valve must be installed horizontally, and the installation direction of the coil must be kept vertical. The advantage of vertical installation is that it can increase the service life. Pay special attention to whether the voltage of the installation environment matches the voltage of the solenoid valve coil. If it does not match, it is easy to burn the solenoid valve. URL for reference: https://www.keplerindustry.com/solenoid-valve

3. Third: The most important thing when installing the solenoid valve is the wiring method, because the wiring method of the imported solenoid valve is different from that of the domestic solenoid valve. In addition, pay special attention to whether the voltage of the solenoid valve coil matches the installation environment voltage, otherwise the solenoid valve is likely to be burned. Our KEPLER's Sales Manager always communicate with our customers or clients for the requirement on the working Voltage. KEPLER prodcuces IP65 IP68 Waterproof Solenoid Valve, High Pressure Solenoid Valve, Explosion-proof Solenoid Valve, High Temperature Solenoid Valve, Direct-Acting Solenoid Valve, Diaphragm Solenoid Valve, Normally-Closed Solenoid Valve, Normally-Opened Solenoid Valve, Stainess Steel Solenoid Valve, Brass Solenoid Valve etc. The coil of these valves are also manufactured & installed by KEPLER factory, which can be customized in DC12V/DC24V/AC24V/AC110V/AC220V/AC380V according to the requests.

4. Forth: When re-working in icy places, the solenoid valve should be heated, or heat preservation measures should be provided. After the lead wire (connector) of the solenoid coil is connected, it should be confirmed whether it is firm or not, and the contact of the connected electrical component should not be shaken. Looseness will cause the solenoid valve to not work.

5. Fifth: If the solenoid valve is in a continuous production working environment, it is best to use a bypass, which is convenient for maintenance and does not affect production. If the solenoid valve is out of service for a long time. Should be cleaned and disassembled. At the same time, keep the parts in order during the disassembly process, and install them in the original way after cleaning.

#SolenoidValve #HighPressureSolenoidValve #BrassSolenoidValve #SS304SolenoidValve #SS316SolenoidValve #StainlessSteelSolenoidValve #HighTemperatureSolenoidValve #ExplosionproofSolenoidValve #AntiCorrosiveSolenoidValve #PilotSolenoidValve #2SSolenoidValve #2WSolenoidValve #IP65IP68SolenoidValve